| |
|
|
|
 |
 |
 |
 |
| |
Ultrasonics
Examinations at Lavender International |
|
|
| |
|
|
|
| |
We provide examinations for Ultrasonic Testing, including
PCN personal certification examinations to Levels 1, 2 and
3, plus examination for employers based schemes such as SNT-TC-1A,
NAS410, EN4179, to Levels 1, 2 and 3. We are unable to offer
ASNT Level 3 examinations, as these are only available in one
location in the UK. For the dates and location of the next
ASNT Level 3 examinations, telephone the Lavender office on
+44(0)1226765769.
Please Note: PCN require that an exam levy is paid
at an appropriate rate
|
|
|
| |
|
|
|
| |
Level
1 |
|
|
| |
|
|
|
| |
To be eligible for the PCN/SNT
Level 1 examination, an eye test must be passed (near vision
and colour).
The UT Level 1 examination includes a theory paper, specific
paper, and a practical exam.
The PCN requirements for Level 1 UT are: 40 hours training,
previous to the exam, and 3 months supervised work experience,
to be obtained either before the examination, or within 12
months after passing the exam.
Once the 40 hours training have been obtained, the examination
passed, and 3 months supervised work experience obtained within
12 months of passing the exam, PCN will issue certification.
The options for UT Level 1 examinations are:
UT Castings
UT Plate Tester
UT Forgings (Plate)
UT Forgings (Plate, Bars, and Billets)
UT Welds 3.1
UT Spot Weld Tester
UT Time of Flight Diffraction*
Resit (Theory)
Resit (Practical)
Recertification
*UT Welds Level 1 is required before UT TOFD can be taken. |
|
|
| |
|
|
|
| |
Level
2 |
|
|
| |
|
|
|
| |
To be eligible for the PCN/SNT
Level 2 examination, an eye test must be passed (near vision
and colour).
The UT Level 2 examination includes a theory paper, specific
paper, and a practical exam.
The PCN requirements for Level 2 UT are: 80 hours training
if Level 1 is held, or 120 hours direct to level 2, previous
to the exam, and 9 months supervised work experience additional
to Level 1 (12 months direct), to be obtained either before
the examination, or within 12 months after passing the exam.
Once the 80 additional hours training have been obtained,
the examination passed, and 9 additional months supervised
work experience obtained within 12 months of passing the exam,
PCN will issue certification.
The options for UT Level 2 examinations are:
UT Castings
UT Plate Tester
UT Forgings (Plate)
UT Forgings (Plate, Bars and Billets)
UT Forgings (Plate, Bars and Billets, Forgings)
UT Spot Weld Tester
UT Welds 3.1 Plate
UT Welds 3.2 Pipe
UT Welds 3.1 + 3.2
UT Welds 3.7 'T'
UT Welds 3.8 Nozzle
UT Welds 3.9 Node
UT Welds 3.8 + 3.9
UT Welds Critical Sizing*
UT Time of Flight Diffraction*
UT Phased Array*
Resit (Theory)
Resit (Practical)
Recertification
*Please note that these require UT Welds Level 2 to be held
before they are taken. |
|
|
| |
|
|
|
| |
Level
3 |
|
|
| |
|
|
|
| |
To be eligible for the PCN/SNT Level 3 examination,
an eye test must be passed (near vision and colour).
You can view the PCN requirements for Level 3 on the Certification
page.
The Level 3 Basic exam must be passed, this is a theory exam
containing questions from a range of methods. In addition
to the basic exam, the method exam must then be passed.
For PCN, there are 3 theory papers, General, Specific, and
Written Procedure. In PCN, if Level 2 is not held, the Level
2 practical exam must be passed.
The options for UT Level 3 examinations are:
Basic Examination
UT Examination
TOFD Examination
UT Level 2 Practical
TOFD Level 2 Practical
Resit
Recertification
|
|
|
 |
|
 |
|
| |
|
|
|
| |
|
|
|
|
